diff --git a/firmware/export/config/sansafuze.h b/firmware/export/config/sansafuze.h
index a0ec8ef..6c8ba82 100644
--- a/firmware/export/config/sansafuze.h
+++ b/firmware/export/config/sansafuze.h
@@ -59,7 +59,7 @@
 */

 /* define this if you can flip your LCD */
-//#define HAVE_LCD_FLIP
+#define HAVE_LCD_FLIP

 /* define this if you can invert the colours on your LCD */
 #define HAVE_LCD_INVERT
diff --git a/firmware/export/config/sansafuzev2.h b/firmware/export/config/sansafuzev2.h
index d2c49f4..f3d8e08 100644
--- a/firmware/export/config/sansafuzev2.h
+++ b/firmware/export/config/sansafuzev2.h
@@ -56,7 +56,7 @@
 */

 /* define this if you can flip your LCD */
-//#define HAVE_LCD_FLIP
+#define HAVE_LCD_FLIP

 /* define this if you can invert the colours on your LCD */
 #define HAVE_LCD_INVERT
diff --git a/firmware/target/arm/as3525/lcd-fuze.c b/firmware/target/arm/as3525/lcd-fuze.c
index ef4791e..d7636f6 100644
--- a/firmware/target/arm/as3525/lcd-fuze.c
+++ b/firmware/target/arm/as3525/lcd-fuze.c
@@ -34,13 +34,14 @@
    HD66789R */
 static bool display_on = false; /* is the display turned on? */

-/* Flip Flag */
-static unsigned short r_entry_mode = R_ENTRY_MODE_HORZ_NORMAL;
-
 /* Reverse Flag */
-static unsigned short r_disp_control_rev = R_DISP_CONTROL_NORMAL;
+static int r_disp_control_rev = R_DISP_CONTROL_NORMAL;
+
+/* Flip flag */
+static int r_drv_output_control = R_DRV_OUTPUT_CONTROL_NORMAL;
+static int r_gate_scan_pos = R_GATE_SCAN_POS_NORMAL;

-static const int xoffset = 20;
+static int xoffset = 20;

 /*** hardware configuration ***/

@@ -62,15 +63,27 @@ void lcd_set_invert_display(bool yesno)
 }

 #ifdef HAVE_LCD_FLIP
-static bool display_flipped = false;
-
 /* turn the display upside down  */
 void lcd_set_flip(bool yesno)
 {
-    display_flipped = yesno;
+    if (yesno)
+    {
+        xoffset = 0;
+        r_drv_output_control = R_DRV_OUTPUT_CONTROL_FLIPPED;
+        r_gate_scan_pos = R_GATE_SCAN_POS_FLIPPED;
+    }
+    else
+    {
+        xoffset = 20;
+        r_drv_output_control = R_DRV_OUTPUT_CONTROL_NORMAL;
+        r_gate_scan_pos = R_GATE_SCAN_POS_NORMAL;
+    }

-    r_entry_mode = yesno ? R_ENTRY_MODE_HORZ_FLIPPED :
-                           R_ENTRY_MODE_HORZ_NORMAL;
+    if (display_on)
+    {
+        lcd_write_reg(R_GATE_SCAN_POS, r_gate_scan_pos);
+        lcd_write_reg(R_DRV_OUTPUT_CONTROL, r_drv_output_control);
+    }
 }
 #endif

@@ -89,9 +102,9 @@ void fuze_display_on(void)
     lcd_write_reg(R_POWER_CONTROL4, 0x60);

     lcd_write_reg(R_POWER_CONTROL4, 0x70);
-    lcd_write_reg(R_DRV_OUTPUT_CONTROL, 277);
+    lcd_write_reg(R_DRV_OUTPUT_CONTROL, r_drv_output_control);
     lcd_write_reg(R_DRV_WAVEFORM_CONTROL, (7<<8));
-    lcd_write_reg(R_ENTRY_MODE, r_entry_mode);
+    lcd_write_reg(R_ENTRY_MODE, R_ENTRY_MODE_HORZ);
     lcd_write_reg(R_DISP_CONTROL2, 0x01);
     lcd_write_reg(R_FRAME_CYCLE_CONTROL, (1<<10));
     lcd_write_reg(R_EXT_DISP_IF_CONTROL, 0);
@@ -140,6 +153,8 @@ void lcd_enable(bool on)
         lcd_write_reg(R_POWER_CONTROL4, 112);
         lcd_write_reg(R_DISP_CONTROL1, 0x11);
         lcd_write_reg(R_DISP_CONTROL1, 0x13 | r_disp_control_rev);
+        lcd_write_reg(R_DRV_OUTPUT_CONTROL, r_drv_output_control);
+        lcd_write_reg(R_GATE_SCAN_POS, r_gate_scan_pos);
         display_on = true;
         lcd_update();      /* Resync display */
         send_event(LCD_EVENT_ACTIVATION, NULL);
@@ -173,15 +188,15 @@ static void lcd_window_x(int xmin, int xmax)
 {
     xmin += xoffset;
     xmax += xoffset;
-    lcd_write_reg(R_HORIZ_RAM_ADDR_POS + 2, (xmax << 8) | xmin);
-    lcd_write_reg(R_RAM_ADDR_SET - 1, xmin);
+    lcd_write_reg(0x46, (xmax << 8) | xmin);
+    lcd_write_reg(0x20, xmin);
 }

 /* Set vertical window addresses */
 static void lcd_window_y(int ymin, int ymax)
 {
-    lcd_write_reg(R_VERT_RAM_ADDR_POS + 2, ymax);
-    lcd_write_reg(R_VERT_RAM_ADDR_POS + 3, ymin);
+    lcd_write_reg(0x47, ymax);
+    lcd_write_reg(0x48, ymin);
     lcd_write_reg(R_RAM_ADDR_SET, ymin);
 }

@@ -224,13 +239,7 @@ void lcd_blit_yuv(unsigned char * const src[3],
     yuv_src[1] = src[1] + (z >> 2) + (src_x >> 1);
     yuv_src[2] = src[2] + (yuv_src[1] - src[1]);

-#ifdef HAVE_LCD_FLIP
-    lcd_write_reg(R_ENTRY_MODE,
-        display_flipped ? R_ENTRY_MODE_VIDEO_FLIPPED : R_ENTRY_MODE_VIDEO_NORMAL
-    );
-#else
-    lcd_write_reg(R_ENTRY_MODE, R_ENTRY_MODE_VIDEO_NORMAL);
-#endif
+    lcd_write_reg(R_ENTRY_MODE, R_ENTRY_MODE_VIDEO);

     lcd_window_x(x, x + width - 1);

@@ -278,7 +287,7 @@ void lcd_update(void)
     if (!display_on)
         return;

-    lcd_write_reg(R_ENTRY_MODE, r_entry_mode);
+    lcd_write_reg(R_ENTRY_MODE, R_ENTRY_MODE_HORZ);

     lcd_window_x(0, LCD_WIDTH - 1);
     lcd_window_y(0, LCD_HEIGHT - 1);
@@ -316,7 +325,7 @@ void lcd_update_rect(int x, int y, int width, int height)
     if (y + height > LCD_HEIGHT)
         height = LCD_HEIGHT - y; /* clip bottom */

-    lcd_write_reg(R_ENTRY_MODE, r_entry_mode);
+    lcd_write_reg(R_ENTRY_MODE, R_ENTRY_MODE_HORZ);

     /* we need to make x and width even to enable 32bit transfers */
     width = (width + (x & 1) + 1) & ~1;
diff --git a/firmware/target/arm/as3525/lcd-fuze.h b/firmware/target/arm/as3525/lcd-fuze.h
index 00bb960..50bec9b 100644
--- a/firmware/target/arm/as3525/lcd-fuze.h
+++ b/firmware/target/arm/as3525/lcd-fuze.h
@@ -41,16 +41,19 @@
 #define R_HORIZ_RAM_ADDR_POS    0x44
 #define R_VERT_RAM_ADDR_POS     0x45

-/* Flip Flag */
-#define R_ENTRY_MODE_HORZ_NORMAL 0x1030
-#define R_ENTRY_MODE_HORZ_FLIPPED 0x1000
-#define R_ENTRY_MODE_VIDEO_NORMAL 0x1038
-#define R_ENTRY_MODE_VIDEO_FLIPPED 0x1018
+#define R_ENTRY_MODE_HORZ   0x1030
+#define R_ENTRY_MODE_VIDEO  0x1038

 /* Reverse Flag */
 #define R_DISP_CONTROL_NORMAL 0x0004
 #define R_DISP_CONTROL_REV    0x0000

+#define R_DRV_OUTPUT_CONTROL_NORMAL     0x115
+#define R_DRV_OUTPUT_CONTROL_FLIPPED    0x215
+
+#define R_GATE_SCAN_POS_NORMAL  0
+#define R_GATE_SCAN_POS_FLIPPED 18
+
 void lcd_write_cmd(int16_t cmd);
 void lcd_write_reg(int reg, int value);
 void fuze_display_on(void);