1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
 firmware/target/arm/as3525/ata_sd_as3525.c |   16 ++++++++++++----
 firmware/target/arm/as3525/clock-target.h  |    6 +++---
 firmware/target/arm/as3525/debug-as3525.c  |   10 +++++-----
 3 files changed, 20 insertions(+), 12 deletions(-)


diff --git a/firmware/target/arm/as3525/ata_sd_as3525.c b/firmware/target/arm/as3525/ata_sd_as3525.c
index 65df027..975df87 100644
--- a/firmware/target/arm/as3525/ata_sd_as3525.c
+++ b/firmware/target/arm/as3525/ata_sd_as3525.c
@@ -103,9 +103,17 @@ static void init_pl180_controller(const int drive);

 static tCardInfo card_info[NUM_DRIVES];

+#ifdef HAVE_MULTIDRIVE
+/* maximum timeouts recommanded in the SD Specification v2.00 */
+#define SD_MAX_READ_TIMEOUT   (((drive == SD_SLOT_AS3525)? (AS3525_PCLK_FREQ): \
+                                   (AS3525_IDE_FREQ)) / 1000 * 100) /* 100 ms */
+#define SD_MAX_WRITE_TIMEOUT  (((drive == SD_SLOT_AS3525)? (AS3525_PCLK_FREQ): \
+                                   (AS3525_IDE_FREQ)) / 1000 * 250) /* 250 ms */
+#else
 /* maximum timeouts recommanded in the SD Specification v2.00 */
-#define SD_MAX_READ_TIMEOUT     ((AS3525_PCLK_FREQ) / 1000 * 100) /* 100 ms */
-#define SD_MAX_WRITE_TIMEOUT    ((AS3525_PCLK_FREQ) / 1000 * 250) /* 250 ms */
+#define SD_MAX_READ_TIMEOUT   ((AS3525_IDE_FREQ) / 1000 * 100) /* 100 ms */
+#define SD_MAX_WRITE_TIMEOUT  ((AS3525_IDE_FREQ) / 1000 * 250) /* 250 ms */
+#endif

 /* for compatibility */
 static long last_disk_activity = -1;
@@ -306,7 +314,7 @@ static int sd_init_card(const int drive)
     /*  End of Card Identification Mode   ************************************/


-    /* full speed for controller clock  MCICLK = MCLK = PCLK = 62 MHz */
+    /* full speed for controller clock MCICLK = MCLK = PCLK = IDECLK = 62 MHz */
     MCI_CLOCK(drive) |= MCI_CLOCK_BYPASS;   /*  FIXME: 50 MHz is spec limit  */
     mci_delay();

@@ -612,7 +620,7 @@ static int sd_select_bank(signed char bank)
             DMA_PERI_SD, DMAC_FLOWCTRL_PERI_MEM_TO_PERI, true, false, 0, DMA_S8,
             NULL);

-        MCI_DATA_TIMER(INTERNAL_AS3525) = SD_MAX_WRITE_TIMEOUT;
+        MCI_DATA_TIMER(INTERNAL_AS3525) = ((AS3525_IDE_FREQ) / 1000 * 250) /* 250 ms */;
         MCI_DATA_LENGTH(INTERNAL_AS3525) = 512;
         MCI_DATA_CTRL(INTERNAL_AS3525) =  (1<<0) /* enable */   |
                                 (0<<1) /* transfer direction */ |
diff --git a/firmware/target/arm/as3525/clock-target.h b/firmware/target/arm/as3525/clock-target.h
index 560e067..bf68ea6 100644
--- a/firmware/target/arm/as3525/clock-target.h
+++ b/firmware/target/arm/as3525/clock-target.h
@@ -113,14 +113,14 @@
   #define AS3525_DBOP_DIV        (CLK_DIV(AS3525_PCLK_FREQ, AS3525_DBOP_FREQ) - 1) /*div=1/(n+1)*/
   #define AS3525_I2C_PRESCALER   CLK_DIV(AS3525_PCLK_FREQ, AS3525_I2C_FREQ)
   #define AS3525_I2C_FREQ        400000
+
+  /*  For now use same divider for ident frequencies on both internal and uSD cards */
   #define AS3525_SD_IDENT_DIV    ((CLK_DIV(AS3525_PCLK_FREQ, AS3525_SD_IDENT_FREQ) / 2) - 1)
   #define AS3525_SD_IDENT_FREQ   400000      /* must be between 100 & 400 kHz */

 #define AS3525_IDE_SEL           AS3525_CLK_PLLA           /* Input Source   */
 #define AS3525_IDE_DIV           (CLK_DIV(AS3525_PLLA_FREQ, AS3525_IDE_FREQ) - 1)/*div=1/(n+1)*/
-#define AS3525_IDE_FREQ          90000000    /* The OF uses 66MHz maximal freq
-                                               but sd transfers fail on some
-                                               players with this limit */
+#define AS3525_IDE_FREQ          AS3525_PCLK_FREQ    /* The OF uses 66MHz maximal freq */

 //#define AS3525_USB_SEL           AS3525_CLK_PLLA            /* Input Source   */
 //#define AS3525_USB_DIV           /* div = 1/(n=0?1:2n)*/
diff --git a/firmware/target/arm/as3525/debug-as3525.c b/firmware/target/arm/as3525/debug-as3525.c
index d8d3e01..4775278 100644
--- a/firmware/target/arm/as3525/debug-as3525.c
+++ b/firmware/target/arm/as3525/debug-as3525.c
@@ -183,9 +183,9 @@ int calc_freq(int clk)
             if(!(MCI_NAND & (1<<8)))
                 return 0;
             else if(MCI_NAND & (1<<10))
-                return calc_freq(CLK_PCLK);
+                return calc_freq(CLK_IDE);
             else
-                return calc_freq(CLK_PCLK)/(((MCI_NAND & 0xff)+1)*2);
+                return calc_freq(CLK_IDE)/(((MCI_NAND & 0xff)+1)*2);
         case CLK_SD_MCLK_MSD:
             if(!(MCI_SD & (1<<8)))
                 return 0;
@@ -222,7 +222,7 @@ bool __dbg_hw_info(void)
 {
     int line;
     int last_nand = 0;
-#if defined(SANSA_E200V2) || defined(SANSA_FUZE) || defined(SANSA_C200V2)
+#ifdef HAVE_MULTIDRIVE
     int last_sd = 0;
 #endif

@@ -293,10 +293,10 @@ bool __dbg_hw_info(void)
             last_nand = MCI_NAND;
                                                 /*  MCLK == PCLK  */
         lcd_putsf(0, line++, "SD  :%3dMHz    %3dMHz",
-            ((last_nand ? (AS3525_PCLK_FREQ/ 1000000): 0) /
+            ((last_nand ? (AS3525_IDE_FREQ/ 1000000): 0) /
             ((last_nand & MCI_CLOCK_BYPASS)? 1:(((last_nand & 0xff)+1) * 2))),
             calc_freq(CLK_SD_MCLK_NAND)/1000000);
-#if defined(SANSA_E200V2) || defined(SANSA_FUZE) || defined(SANSA_C200V2)
+#ifdef HAVE_MULTIDRIVE
         if(MCI_SD)
             last_sd = MCI_SD;
         lcd_putsf(0, line++, "uSD :%3dMHz    %3dMHz",