$ dmesg
Linux version 2.6.29.2 (root@slack64) (gcc version 4.3.3 (GCC) ) #2 SMP Tue Apr 28 16:28:09 CEST 2009
Command line: BOOT_IMAGE=Linux ro root=806 vt.default_utf8=0
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e7000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000bffb0000 (usable)
BIOS-e820: 00000000bffb0000 - 00000000bffc0000 (ACPI data)
BIOS-e820: 00000000bffc0000 - 00000000bfff0000 (ACPI NVS)
BIOS-e820: 00000000bfff0000 - 00000000c0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
DMI present.
AMI BIOS detected: BIOS may corrupt low RAM, working around it.
last_pfn = 0x140000 max_arch_pfn = 0x100000000
last_pfn = 0xbffb0 max_arch_pfn = 0x100000000
init_memory_mapping: 0000000000000000-00000000bffb0000
0000000000 - 00bfe00000 page 2M
00bfe00000 - 00bffb0000 page 4k
kernel direct mapping tables up to bffb0000 @ 10000-15000
last_map_addr: bffb0000 end: bffb0000
init_memory_mapping: 0000000100000000-0000000140000000
0100000000 - 0140000000 page 2M
kernel direct mapping tables up to 140000000 @ 13000-19000
last_map_addr: 140000000 end: 140000000
ACPI: RSDP 000FA560, 0014 (r0 ACPIAM)
ACPI: RSDT BFFB0000, 0038 (r1 A_M_I OEMRSDT 4000809 MSFT 97)
ACPI: FACP BFFB0200, 0084 (r2 A M I OEMFACP 12000601 MSFT 97)
FADT: X_PM1a_EVT_BLK.bit_width (16) does not match PM1_EVT_LEN (4)
ACPI: DSDT BFFB0450, 4A3F (r1 ASR63 ASR63141 141 INTL 20051117)
ACPI: FACS BFFC0000, 0040
ACPI: APIC BFFB0390, 0080 (r1 A_M_I OEMAPIC 4000809 MSFT 97)
ACPI: MCFG BFFB0410, 003C (r1 A_M_I OEMMCFG 4000809 MSFT 97)
ACPI: OEMB BFFC0040, 0060 (r1 A_M_I AMI_OEM 4000809 MSFT 97)
ACPI: SSDT BFFB4E90, 030E (r1 A M I POWERNOW 1 AMD 1)
ACPI: Local APIC address 0xfee00000
(6 early reservations) ==> bootmem [0000000000 - 0140000000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
#2 [0000200000 - 0000d389ac] TEXT DATA BSS ==> [0000200000 - 0000d389ac]
#3 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
#4 [0000010000 - 0000013000] PGTABLE ==> [0000010000 - 0000013000]
#5 [0000013000 - 0000014000] PGTABLE ==> [0000013000 - 0000014000]
found SMP MP-table at [ffff8800000ff780] 000ff780
[ffffe20000000000-ffffe200045fffff] PMD -> [ffff880028200000-ffff88002c7fffff] on node 0
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x00140000
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
0: 0x00000010 -> 0x0000009f
0: 0x00000100 -> 0x000bffb0
0: 0x00100000 -> 0x00140000
On node 0 totalpages: 1048383
DMA zone: 56 pages used for memmap
DMA zone: 2977 pages reserved
DMA zone: 950 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 767976 pages, LIFO batch:31
Normal zone: 3584 pages used for memmap
Normal zone: 258560 pages, LIFO batch:31
Nvidia board detected. Ignoring ACPI timer override.
If you got timer trouble try acpi_use_timer_override
Detected use of extended apic ids on hypertransport bus
ACPI: PM-Timer IO Port: 0x4008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 0, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: BIOS IRQ0 pin2 override ignored.
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
ACPI: IRQ9 used by override.
ACPI: IRQ14 used by override.
ACPI: IRQ15 used by override.
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 4 CPUs, 2 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e7000
PM: Registered nosave memory: 00000000000e7000 - 0000000000100000
PM: Registered nosave memory: 00000000bffb0000 - 00000000bffc0000
PM: Registered nosave memory: 00000000bffc0000 - 00000000bfff0000
PM: Registered nosave memory: 00000000bfff0000 - 00000000c0000000
PM: Registered nosave memory: 00000000c0000000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
PM: Registered nosave memory: 00000000fec01000 - 00000000fee00000
PM: Registered nosave memory: 00000000fee00000 - 00000000fef00000
PM: Registered nosave memory: 00000000fef00000 - 00000000fff80000
PM: Registered nosave memory: 00000000fff80000 - 0000000100000000
Allocating PCI resources starting at c4000000 (gap: c0000000:3ec00000)
NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Allocating 53248 bytes of per cpu data
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1027486
Kernel command line: BOOT_IMAGE=Linux ro root=806 vt.default_utf8=0
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
Fast TSC calibration using PIT
Detected 3014.136 MHz processor.
spurious 8259A interrupt: IRQ7.
Console: colour dummy device 80x25
console [tty0] enabled
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Checking aperture...
No AGP bridge found
Node 0: aperture @ 76c8000000 size 32 MB
Aperture beyond 4GB. Ignoring.
Your BIOS doesn't leave a aperture memory hole
Please enable the IOMMU option in the BIOS setup
This costs you 64 MB of RAM
Mapping aperture over 65536 KB of RAM @ 20000000
PM: Registered nosave memory: 0000000020000000 - 0000000024000000
Memory: 4037296k/5242880k available (7206k kernel code, 1049348k absent, 155292k reserved, 2808k data, 436k init)
SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Calibrating delay loop (skipped), value calculated using timer frequency.. 6028.27 BogoMIPS (lpj=12056544)
Security Framework initialized
Mount-cache hash table entries: 256
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
tseg: 0000000000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
using C1E aware idle routine
ACPI: Core revision 20081204
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 6000+ stepping 03
Booting processor 1 APIC 0x1 ip 0x6000
Initializing CPU#1
Calibrating delay using timer specific routine.. 6027.84 BogoMIPS (lpj=12055690)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 6000+ stepping 03
Brought up 2 CPUs
Total of 2 processors activated (12056.11 BogoMIPS).
net_namespace: 1736 bytes
xor: automatically using best checksumming function: generic_sse
generic_sse: 9314.000 MB/sec
xor: using function: generic_sse (9314.000 MB/sec)
NET: Registered protocol family 16
node 0 link 0: io port [1000, ffffff]
TOM: 00000000c0000000 aka 3072M
node 0 link 0: mmio [e0000000, efffffff]
node 0 link 0: mmio [a0000, bffff]
node 0 link 0: mmio [c0000000, fe0bffff]
TOM2: 0000000140000000 aka 5120M
bus: [00,07] on node 0 link 0
bus: 00 index 0 io port: [0, ffff]
bus: 00 index 1 mmio: [c0000000, ffffffff]
bus: 00 index 2 mmio: [a0000, bffff]
bus: 00 index 3 mmio: [140000000, fcffffffff]
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: Not using MMCONFIG.
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
PCI: Using MMCONFIG at e0000000 - efffffff
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:01.1: reg 10 io port: [0xbc00-0xbc3f]
pci 0000:00:01.1: reg 20 io port: [0x5000-0x503f]
pci 0000:00:01.1: reg 24 io port: [0x6000-0x603f]
pci 0000:00:01.1: PME# supported from D3hot D3cold
pci 0000:00:01.1: PME# disabled
pci 0000:00:02.0: reg 10 32bit mmio: [0xdf6ff000-0xdf6fffff]
pci 0000:00:02.0: supports D1 D2
pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.0: PME# disabled
pci 0000:00:02.1: reg 10 32bit mmio: [0xdf6fec00-0xdf6fecff]
pci 0000:00:02.1: supports D1 D2
pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.1: PME# disabled
pci 0000:00:06.0: reg 20 io port: [0xffa0-0xffaf]
pci 0000:00:07.0: reg 10 32bit mmio: [0xdf6fd000-0xdf6fdfff]
pci 0000:00:07.0: reg 14 io port: [0xb480-0xb487]
pci 0000:00:07.0: supports D1 D2
pci 0000:00:07.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:07.0: PME# disabled
pci 0000:00:08.0: reg 10 io port: [0xb400-0xb407]
pci 0000:00:08.0: reg 14 io port: [0xb080-0xb083]
pci 0000:00:08.0: reg 18 io port: [0xb000-0xb007]
pci 0000:00:08.0: reg 1c io port: [0xac00-0xac03]
pci 0000:00:08.0: reg 20 io port: [0xa880-0xa88f]
pci 0000:00:08.0: reg 24 32bit mmio: [0xdf6fc000-0xdf6fcfff]
pci 0000:00:08.1: reg 10 io port: [0xa800-0xa807]
pci 0000:00:08.1: reg 14 io port: [0xa480-0xa483]
pci 0000:00:08.1: reg 18 io port: [0xa400-0xa407]
pci 0000:00:08.1: reg 1c io port: [0xa080-0xa083]
pci 0000:00:08.1: reg 20 io port: [0xa000-0xa00f]
pci 0000:00:08.1: reg 24 32bit mmio: [0xdf6fb000-0xdf6fbfff]
pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:09.0: PME# disabled
pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0b.0: PME# disabled
pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0c.0: PME# disabled
pci 0000:01:08.0: reg 10 io port: [0xcc00-0xcc1f]
pci 0000:01:08.0: reg 14 io port: [0xc880-0xc8ff]
pci 0000:01:08.0: supports D2
pci 0000:00:04.0: transparent bridge
pci 0000:00:04.0: bridge io port: [0xc000-0xcfff]
pci 0000:02:00.0: reg 10 64bit mmio: [0xc0000000-0xcfffffff]
pci 0000:02:00.0: reg 18 64bit mmio: [0xdf7f0000-0xdf7fffff]
pci 0000:02:00.0: reg 20 io port: [0xd000-0xd0ff]
pci 0000:02:00.0: reg 30 32bit mmio: [0xdf7c0000-0xdf7dffff]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.1: reg 10 64bit mmio: [0xdf7ec000-0xdf7effff]
pci 0000:02:00.1: supports D1 D2
pci 0000:00:09.0: bridge io port: [0xd000-0xdfff]
pci 0000:00:09.0: bridge 32bit mmio: [0xdf700000-0xdf7fffff]
pci 0000:00:09.0: bridge 64bit mmio pref: [0xc0000000-0xcfffffff]
pci 0000:00:0b.0: bridge io port: [0xe000-0xefff]
pci 0000:00:0b.0: bridge 32bit mmio: [0xdf800000-0xdfffffff]
pci 0000:00:0b.0: bridge 64bit mmio pref: [0xdc000000-0xdeffffff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR10._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR11._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *10
ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *11
ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *10
ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *5
ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *10
ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *11
ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LACI] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LMC9] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11
ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *5
ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *10
ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
ACPI Warning (tbutils-0242): Incorrect checksum in table [OEMB] - 8B, should be 7E [20081204]
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI-DMA: Disabling AGP.
PCI-DMA: aperture base @ 20000000 size 65536 KB
PCI-DMA: using GART IOMMU.
PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 15 devices
ACPI: ACPI bus type pnp unregistered
system 00:07: ioport range 0x4d0-0x4d1 has been reserved
system 00:07: ioport range 0x800-0x80f has been reserved
system 00:07: ioport range 0x4000-0x407f has been reserved
system 00:07: ioport range 0x4080-0x40ff has been reserved
system 00:07: ioport range 0x4400-0x447f has been reserved
system 00:07: ioport range 0x4480-0x44ff has been reserved
system 00:07: ioport range 0x4800-0x487f has been reserved
system 00:07: ioport range 0x4880-0x48ff has been reserved
system 00:07: ioport range 0x2000-0x207f has been reserved
system 00:07: ioport range 0x2080-0x20ff has been reserved
system 00:07: iomem range 0xfec80000-0x1fd93ffff could not be reserved
system 00:07: iomem range 0xfefe0000-0xfefe01ff has been reserved
system 00:07: iomem range 0xfefe1000-0xfefe1fff has been reserved
system 00:07: iomem range 0xfee01000-0xfeefffff has been reserved
system 00:08: iomem range 0xfec00000-0xfec00fff has been reserved
system 00:08: iomem range 0xfee00000-0xfee00fff has been reserved
system 00:0c: ioport range 0x290-0x29f has been reserved
system 00:0d: iomem range 0xe0000000-0xefffffff has been reserved
system 00:0e: iomem range 0x0-0x9ffff could not be reserved
system 00:0e: iomem range 0xc0000-0xcffff has been reserved
system 00:0e: iomem range 0xe0000-0xfffff could not be reserved
system 00:0e: iomem range 0x100000-0xbfffffff could not be reserved
system 00:0e: iomem range 0xff380000-0xffffffff could not be reserved
pci 0000:00:04.0: PCI bridge, secondary bus 0000:01
pci 0000:00:04.0: IO window: 0xc000-0xcfff
pci 0000:00:04.0: MEM window: disabled
pci 0000:00:04.0: PREFETCH window: disabled
pci 0000:00:09.0: PCI bridge, secondary bus 0000:02
pci 0000:00:09.0: IO window: 0xd000-0xdfff
pci 0000:00:09.0: MEM window: 0xdf700000-0xdf7fffff
pci 0000:00:09.0: PREFETCH window: 0x000000c0000000-0x000000cfffffff
pci 0000:00:0b.0: PCI bridge, secondary bus 0000:03
pci 0000:00:0b.0: IO window: 0xe000-0xefff
pci 0000:00:0b.0: MEM window: 0xdf800000-0xdfffffff
pci 0000:00:0b.0: PREFETCH window: 0x000000dc000000-0x000000deffffff
pci 0000:00:0c.0: PCI bridge, secondary bus 0000:05
pci 0000:00:0c.0: IO window: disabled
pci 0000:00:0c.0: MEM window: disabled
pci 0000:00:0c.0: PREFETCH window: disabled
pci 0000:00:04.0: setting latency timer to 64
pci 0000:00:09.0: setting latency timer to 64
pci 0000:00:0b.0: setting latency timer to 64
pci 0000:00:0c.0: setting latency timer to 64
pci_bus 0000:00: resource 0 io: [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:01: resource 0 io: [0xc000-0xcfff]
pci_bus 0000:01: resource 1 mem: [0x0-0x0]
pci_bus 0000:01: resource 2 mem: [0x0-0x0]
pci_bus 0000:01: resource 3 io: [0x00-0xffff]
pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffffffffffff]
pci_bus 0000:02: resource 0 io: [0xd000-0xdfff]
pci_bus 0000:02: resource 1 mem: [0xdf700000-0xdf7fffff]
pci_bus 0000:02: resource 2 mem: [0xc0000000-0xcfffffff]
pci_bus 0000:02: resource 3 mem: [0x0-0x0]
pci_bus 0000:03: resource 0 io: [0xe000-0xefff]
pci_bus 0000:03: resource 1 mem: [0xdf800000-0xdfffffff]
pci_bus 0000:03: resource 2 mem: [0xdc000000-0xdeffffff]
pci_bus 0000:03: resource 3 mem: [0x0-0x0]
pci_bus 0000:05: resource 0 mem: [0x0-0x0]
pci_bus 0000:05: resource 1 mem: [0x0-0x0]
pci_bus 0000:05: resource 2 mem: [0x0-0x0]
pci_bus 0000:05: resource 3 mem: [0x0-0x0]
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
NET: Registered protocol family 1
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
NTFS driver 2.1.29 [Flags: R/W].
JFS: nTxBlock = 8192, nTxLock = 65536
SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled
SGI XFS Quota Management subsystem
GFS2 (built Apr 28 2009 16:23:20) installed
msgmni has been set to 7887
alg: No test for cipher_null (cipher_null-generic)
alg: No test for digest_null (digest_null-generic)
alg: No test for compress_null (compress_null-generic)
alg: No test for fcrypt (fcrypt-generic)
alg: No test for stdrng (krng)
async_tx: api initialized (async)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:02:00.0: Boot video device
pcieport-driver 0000:00:09.0: setting latency timer to 64
pcieport-driver 0000:00:09.0: irq 24 for MSI/MSI-X
pcieport-driver 0000:00:0b.0: setting latency timer to 64
pcieport-driver 0000:00:0b.0: irq 25 for MSI/MSI-X
pcieport-driver 0000:00:0c.0: setting latency timer to 64
pcieport-driver 0000:00:0c.0: irq 26 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
vesafb: framebuffer at 0xc0000000, mapped to 0xffffc20010680000, using 3072k, total 16384k
vesafb: mode is 1024x768x16, linelength=2048, pages=9
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
Linux agpgart interface v0.103
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
brd: module loaded
loop: module loaded
Compaq SMART2 Driver (v 2.6.0)
HP CISS Driver (v 3.6.20)
input: Macintosh mouse button emulation as /devices/virtual/input/input0
Uniform Multi-Platform E-IDE driver
amd74xx 0000:00:06.0: UDMA133 controller
amd74xx 0000:00:06.0: IDE controller (0x10de:0x03ec rev 0xa2)
amd74xx 0000:00:06.0: IDE port disabled
amd74xx 0000:00:06.0: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xffa0-0xffa7
Probing IDE interface ide0...
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide-gd driver 1.18
ide-cd driver 5.00
Loading iSCSI transport class v2.0-870.
rdac: device handler registered
hp_sw: device handler registered
emc: device handler registered
alua: device handler registered
fcoe_transport_register:fcoesw
Adaptec aacraid driver 1.1-5[2456]-ms
aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
scsi: <fdomain> Detection failed (no card)
QLogic Fibre Channel HBA Driver: 8.03.00-k4
iscsi: registered transport (qla4xxx)
QLogic iSCSI HBA Driver
Emulex LightPulse Fibre Channel SCSI driver 8.3.0
Copyright(c) 2004-2008 Emulex. All rights reserved.
DC390: clustering now enabled by default. If you get problems load
with "disable_clustering=1" and report to maintainers
megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
megasas: 00.00.04.01 Thu July 24 11:41:51 PST 2008
GDT-HA: Storage RAID Controller Driver. Version: 3.05
3ware Storage Controller device driver for Linux v1.26.02.002.
3ware 9000 Storage Controller device driver for Linux v2.26.02.011.
ipr: IBM Power RAID SCSI Device Driver version: 2.4.1 (April 24, 2007)
RocketRAID 3xxx/4xxx Controller driver v1.3 (071203)
stex: Promise SuperTrak EX Driver version: 3.6.0000.1
st: Version 20081215, fixed bufsize 32768, s/g segs 256
Driver 'st' needs updating - please use bus_type methods
Driver 'sd' needs updating - please use bus_type methods
Driver 'sr' needs updating - please use bus_type methods
sata_nv 0000:00:08.0: version 3.5
ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23
sata_nv 0000:00:08.0: PCI INT A -> Link[LSA0] -> GSI 23 (level, low) -> IRQ 23
sata_nv 0000:00:08.0: setting latency timer to 64
scsi0 : sata_nv
scsi1 : sata_nv
ata1: SATA max UDMA/133 cmd 0xb400 ctl 0xb080 bmdma 0xa880 irq 23
ata2: SATA max UDMA/133 cmd 0xb000 ctl 0xac00 bmdma 0xa888 irq 23
ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 22
sata_nv 0000:00:08.1: PCI INT B -> Link[LSA1] -> GSI 22 (level, low) -> IRQ 22
sata_nv 0000:00:08.1: setting latency timer to 64
scsi2 : sata_nv
scsi3 : sata_nv
ata3: SATA max UDMA/133 cmd 0xa800 ctl 0xa480 bmdma 0xa000 irq 22
ata4: SATA max UDMA/133 cmd 0xa400 ctl 0xa080 bmdma 0xa008 irq 22
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.00: ATAPI: HL-DT-ST DVDRAM GH20LS15, JL00, max UDMA/100
ata3.00: configured for UDMA/100
scsi 2:0:0:0: CD-ROM HL-DT-ST DVDRAM GH20LS15 JL00 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 2:0:0:0: Attached scsi CD-ROM sr0
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata4.00: ATA-8: ST3500820AS, SD36, max UDMA/133
ata4.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata4.00: configured for UDMA/133
scsi 3:0:0:0: Direct-Access ATA ST3500820AS SD36 PQ: 0 ANSI: 5
sd 3:0:0:0: [sda] 976773168 512-byte hardware sectors: (500 GB/465 GiB)
sd 3:0:0:0: [sda] Write Protect is off
sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 3:0:0:0: [sda] 976773168 512-byte hardware sectors: (500 GB/465 GiB)
sd 3:0:0:0: [sda] Write Protect is off
sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
sd 3:0:0:0: [sda] Attached SCSI disk
I2O subsystem v1.325
i2o: max drivers = 8
I2O Configuration OSM v1.323
I2O Bus Adapter OSM v1.317
I2O Block Device OSM v1.325
I2O SCSI Peripheral OSM v1.316
I2O ProcFS OSM v1.316
Fusion MPT base driver 3.04.07
Copyright (c) 1999-2008 LSI Corporation
Fusion MPT SPI Host driver 3.04.07
Fusion MPT FC Host driver 3.04.07
Fusion MPT SAS Host driver 3.04.07
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 21
ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUB2] -> GSI 21 (level, low) -> IRQ 21
ehci_hcd 0000:00:02.1: setting latency timer to 64
ehci_hcd 0000:00:02.1: EHCI Host Controller
ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:02.1: debug port 1
ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
ehci_hcd 0000:00:02.1: irq 21, io mem 0xdf6fec00
ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.29.2 ehci_hcd
usb usb1: SerialNumber: 0000:00:02.1
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 10 ports detected
116x: driver isp116x-hcd, 03 Nov 2005
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 20
ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUB0] -> GSI 20 (level, low) -> IRQ 20
ohci_hcd 0000:00:02.0: setting latency timer to 64
ohci_hcd 0000:00:02.0: OHCI Host Controller
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:02.0: irq 20, io mem 0xdf6ff000
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: OHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.29.2 ohci_hcd
usb usb2: SerialNumber: 0000:00:02.0
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 10 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
sl811: driver sl811-hcd, 19 May 2005
r8a66597_hcd: driver r8a66597_hcd, 10 Apr 2008
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
i2c /dev entries driver
md: linear personality registered for level -1
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
md: raid10 personality registered for level 10
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
raid6: int64x1 2013 MB/s
raid6: int64x2 2568 MB/s
raid6: int64x4 2854 MB/s
raid6: int64x8 2432 MB/s
raid6: sse2x1 4414 MB/s
raid6: sse2x2 5604 MB/s
raid6: sse2x4 5803 MB/s
raid6: using algorithm sse2x4 (5803 MB/s)
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
md: multipath personality registered for level -4
device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
md: Waiting for all devices to be available before autodetect
md: If you don't use raid, use raid=noautodetect
md: Autodetecting RAID arrays.
md: Scanned 0 and added 0 devices.
md: autorun ...
md: ... autorun DONE.
EXT3-fs: sda6: couldn't mount because of unsupported optional features (240).
EXT2-fs: sda6: couldn't mount because of unsupported optional features (240).
EXT4-fs: barriers enabled
kjournald2 starting: pid 1404, dev sda6:8, commit interval 5 seconds
EXT4-fs: delayed allocation enabled
EXT4-fs: file extents enabled
EXT4-fs: mballoc enabled
EXT4-fs: mounted filesystem sda6 with ordered data mode
VFS: Mounted root (ext4 filesystem) readonly on device 8:6.
Freeing unused kernel memory: 436k freed
usb 2-1: new low speed USB device using ohci_hcd and address 2
usb 2-1: New USB device found, idVendor=1532, idProduct=0002
usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1: Product: Razer Diamondback Optical Mouse
usb 2-1: Manufacturer: Razer
usb 2-1: configuration #1 chosen from 1 choice
input: Razer Razer Diamondback Optical Mouse as /devices/pci0000:00/0000:00:02.0/usb2/2-1/2-1:1.0/input/input2
generic-usb 0003:1532:0002.0001: input,hidraw0: USB HID v1.10 Mouse [Razer Razer Diamondback Optical Mouse] on usb-0000:00:02.0-1/input0
sr 2:0:0:0: Attached scsi generic sg0 type 5
sd 3:0:0:0: Attached scsi generic sg1 type 0
forcedeth: Reverse Engineered nForce ethernet driver. Version 0.62.
ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 23
forcedeth 0000:00:07.0: PCI INT A -> Link[LMAC] -> GSI 23 (level, low) -> IRQ 23
forcedeth 0000:00:07.0: setting latency timer to 64
i2c_core: exports duplicate symbol i2c_smbus_xfer (owned by kernel)
input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
processor ACPI_CPU:00: registered as cooling_device0
processor ACPI_CPU:01: registered as cooling_device1
ACPI: Power Button (CM) [PWRB]
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, y3k, 114 bytes nvram
parport_pc 00:06: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
ACPI: PCI Interrupt Link [LNEA] enabled at IRQ 19
HDA Intel 0000:02:00.1: PCI INT B -> Link[LNEA] -> GSI 19 (level, low) -> IRQ 19
HDA Intel 0000:02:00.1: setting latency timer to 64
ppdev: user-space parallel port driver
forcedeth 0000:00:07.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:19:66:7a:8a:8f
forcedeth 0000:00:07.0: highdma pwrctl mgmt timirq lnktim msi desc-v3
k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
i2c-adapter i2c-0: nForce2 SMBus adapter at 0x5000
i2c-adapter i2c-1: nForce2 SMBus adapter at 0x6000
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 18
ICE1724 0000:01:08.0: PCI INT A -> Link[LNKA] -> GSI 18 (level, low) -> IRQ 18
juli@: analog I/O detected
Adding 52428088k swap on /dev/sda5. Priority:-1 extents:1 across:52428088k
fuse init (API version 7.11)
EXT4 FS on sda6, internal journal on sda6:8
lp0: using parport0 (interrupt-driven).
lp0: console ready
EXT4-fs: barriers enabled
kjournald2 starting: pid 2875, dev sda7:8, commit interval 5 seconds
EXT4 FS on sda7, internal journal on sda7:8
EXT4-fs: delayed allocation enabled
EXT4-fs: file extents enabled
EXT4-fs: mballoc enabled
EXT4-fs: mounted filesystem sda7 with ordered data mode
forcedeth 0000:00:07.0: irq 27 for MSI/MSI-X
eth0: no link during initialization.
eth0: link up.
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
i2c_core: exports duplicate symbol i2c_smbus_xfer (owned by kernel)
[drm] Initialized drm 1.1.0 20060810
i2c_core: exports duplicate symbol i2c_smbus_xfer (owned by kernel)
eth0: no IPv6 routers present
nepomukservices[3367]: segfault at 100000008 ip 00007f431185d7ae sp 00007fff19e5fdf0 error 4 in libQtCore.so.4.5.1[7f43117f9000+23a000]
Pastie << self Blog
