|
|
blade01-sles-tsm:/var/lib/puppet # puppetd --genconfig
# The configuration file for puppetd. Note that this file
# is likely to have unused configuration parameters in it; any parameter that's
# valid anywhere in Puppet can be in any config file, even if it's not used.
#
# Every section can specify three special parameters: owner, group, and mode.
# These parameters affect the required permissions of any files specified after
# their specification. Puppet will sometimes use these parameters to check its
# own configured state, so they can be used to make Puppet a bit more self-managing.
#
# Note also that the section names are entirely for human-level organizational
# purposes; they don't provide separate namespaces. All parameters are in a
# single namespace.
#
# Generated on Tue Aug 26 14:14:22 CEST 2008.
#
[puppetd]
# The LDAP port. Only used if ``ldapnodes`` is enabled.
# The default value is '389'.
# ldapport = 389
# The LDAP attributes to include when querying LDAP for nodes. All
# returned attributes are set as variables in the top-level scope.
# Multiple values should be comma-separated. The value 'all' returns
# all attributes.
# The default value is 'all'.
# ldapattrs = all
# The password to use to connect to LDAP.
# The default value is ''.
# ldappassword =
# Whether TLS should be used when searching for nodes.
# Defaults to false because TLS usually requires certificates
# to be set up on the client side.
# ldaptls = false
# The search string used to find an LDAP node.
# The default value is '(&(objectclass=puppetClient)(cn=%s))'.
# ldapstring = (&(objectclass=puppetClient)(cn=%s))
# The attribute to use to define the parent node.
# The default value is 'parentnode'.
# ldapparentattr = parentnode
# The search base for LDAP searches. It's impossible to provide
# a meaningful default here, although the LDAP libraries might
# have one already set. Generally, it should be the 'ou=Hosts'
# branch under your main directory.
# The default value is ''.
# ldapbase =
# Whether to search for node configurations in LDAP. See
# http://reductivelabs.com/puppet/trac/wiki/LdapNodes/ for more information.
# ldapnodes = false
# The LDAP server. Only used if ``ldapnodes`` is enabled.
# The default value is 'ldap'.
# ldapserver = ldap
# The LDAP attributes to use to define Puppet classes. Values
# should be comma-separated.
# The default value is 'puppetclass'.
# ldapclassattrs = puppetclass
# The user to use to connect to LDAP. Must be specified as a
# full DN.
# The default value is ''.
# ldapuser =
# Whether SSL should be used when searching for nodes.
# Defaults to false because SSL usually requires certificates
# to be set up on the client side.
# ldapssl = false
# The maximum allowed UID. Some platforms use negative UIDs
# but then ship with tools that do not know how to handle signed ints, so the UIDs show up as
# huge numbers that can then not be fed back into the system. This is a hackish way to fail in a
# slightly more useful way when that happens.
# The default value is '4294967290'.
# maximum_uid = 4294967290
# Send the process into the background. This is the default.
# The default value is 'true'.
# daemonize = true
# From where to retrieve plugins. The standard Puppet ``file`` type
# is used for retrieval, so anything that is a valid file source can
# be used here.
# The default value is 'puppet://$server/plugins'.
pluginsource = puppet://puppet/plugins
# Where Puppet should look for facts. Multiple directories should
# be colon-separated, like normal PATH variables.
# The default value is '$vardir/facts'.
factpath = /var/lib/puppet/facts
# Whether facts should be synced with the central server.
# factsync = false
# Whether to just print a configuration to stdout and exit. Only makes
# sense when used interactively. Takes into account arguments specified
# on the CLI.
genconfig = true
# Where Puppet stores dynamic and growing data. The default for this parameter is calculated specially, like `confdir`_.
# The default value is '/var/puppet'.
vardir = /var/lib/puppet
# Where Puppet PID files are kept.
# The default value is '$vardir/run'.
rundir = /var/run/puppet
# Whether to print a contextual diff when files are being replaced. The diff
# is printed on stdout, so this option is meaningless unless you are running Puppet interactively.
# This feature currently requires the ``diff/lcs`` Ruby library.
# show_diff = false
# An external command that can produce node information. The output
# must be a YAML dump of a hash, and that hash must have one or both of
# ``classes`` and ``parameters``, where ``classes`` is an array and
# ``parameters`` is a hash. For unknown nodes, the commands should
# exit with a non-zero exit code.
# This command makes it straightforward to store your node mapping
# information in other data sources like databases.
# The default value is 'none'.
# external_nodes = none
# Where Puppet should look for plugins. Multiple directories should
# be colon-separated, like normal PATH variables. As of 0.23.1, this
# option is deprecated; download your custom libraries to the $libdir
# instead.
# The default value is '$vardir/plugins'.
pluginpath = /var/lib/puppet/plugins
# Which diff command to use when printing differences between files.
# The default value is 'diff'.
# diff = diff
# Where to find information about nodes.
# The default value is 'plain'.
# node_terminus = plain
# The environment Puppet is running in. For clients
# (e.g., ``puppetd``) this determines the environment itself, which
# is used to find modules and much more. For servers (i.e.,
# ``puppetmasterd``) this provides the default environment for nodes
# we know nothing about.
# The default value is 'development'.
# environment = development
# Whether plugins should be synced with the central server.
pluginsync = true
# Whether to print stack traces on some errors
# trace = false
# The name of the service, if we are running as one. The
# default is essentially $0 without the path or ``.rb``.
# The default value is 'puppetd'.
# name = puppetd
# Whether to create the necessary user and group that puppetd will
# run as.
# mkusers = false
# Where Puppet should store facts that it pulls down from the central
# server.
# The default value is '$vardir/facts'.
factdest = /var/lib/puppet/facts
# What files to ignore when pulling down facts.
# The default value is '.svn CVS'.
# factsignore = .svn CVS
# Whether to use colors when logging to the console.
# Valid values are ``ansi`` (equivalent to ``true``), ``html`` (mostly
# used during testing with TextMate), and ``false``, which produces
# no color.
# The default value is 'ansi'.
# color = ansi
# Whether to just print a manifest to stdout and exit. Only makes
# sense when used interactively. Takes into account arguments specified
# on the CLI.
# genmanifest = false
# An extra search path for Puppet. This is only useful
# for those files that Puppet will load on demand, and is only
# guaranteed to work for those cases. In fact, the autoload
# mechanism is responsible for making sure this directory
# is in Ruby's search path
# The default value is '$vardir/lib'.
libdir = /var/lib/puppet/lib
# What syslog facility to use when logging to
# syslog. Syslog has a fixed list of valid facilities, and you must
# choose one of those; you cannot just make one up.
# The default value is 'daemon'.
# syslogfacility = daemon
# The directory where Puppet state is stored. Generally,
# this directory can be removed without causing harm (although it
# might result in spurious service restarts).
# The default value is '$vardir/state'.
statedir = /var/lib/puppet/state
# A parameter that can be used in commit
# hooks, since it enables you to parse-check a single file rather
# than requiring that all files exist.
# ignoreimport = false
# Print the value of a specific configuration parameter. If a
# parameter is provided for this, then the value is printed and puppet
# exits. Comma-separate multiple values. For a list of all values,
# specify 'all'. This feature is only available in Puppet versions
# higher than 0.18.4.
# The default value is ''.
# configprint =
# Where Puppet should store plugins that it pulls down from the central
# server.
# The default value is '$libdir'.
plugindest = /var/lib/puppet/lib
# Which arguments to pass to the diff command when printing differences between files.
# The default value is ''.
# diff_args =
# What files to ignore when pulling down plugins.
# The default value is '.svn CVS'.
# pluginsignore = .svn CVS
# The main Puppet configuration directory. The default for this parameter is calculated based on the user. If the process
# is runnig as root or the user that ``puppetmasterd`` is supposed to run as, it defaults to a system directory, but if it's running as any other user,
# it defaults to being in ``~``.
# The default value is '/etc/puppet'.
# confdir = /etc/puppet
# From where to retrieve facts. The standard Puppet ``file`` type
# is used for retrieval, so anything that is a valid file source can
# be used here.
# The default value is 'puppet://$server/facts'.
factsource = puppet://puppet/facts
# The Puppet log directory.
# The default value is '$vardir/log'.
logdir = /var/log/puppet
# The configuration file that defines the rights to the different
# namespaces and methods. This can be used as a coarse-grained
# authorization system for both ``puppetd`` and ``puppetmasterd``.
# The default value is '$confdir/namespaceauth.conf'.
authconfig = /etc/puppet/namespaceauth.conf
# The minimum time to wait (in seconds) between checking for updates in
# configuration files. This timeout determines how quickly Puppet checks whether
# a file (such as manifests or templates) has changed on disk.
# The default value is '15'.
# filetimeout = 15
# Whether matching in case statements and selectors
# should be case-sensitive. Case insensitivity is
# handled by downcasing all values before comparison.
# casesensitive = false
# Where SSL certificates are kept.
# The default value is '$confdir/ssl'.
ssldir = /var/lib/puppet/ssl
# The valid environments for Puppet clients.
# This is more useful as a server-side setting than client, but any
# environment chosen must be in this list. Values should be
# separated by a comma.
# The default value is 'production,development'.
# environments = production,development
# Whether log files should always flush to disk.
# autoflush = false
# The shell search path. Defaults to whatever is inherited
# from the parent process.
# The default value is 'none'.
# path = none
# Which port puppetmasterd listens on.
# The default value is '8140'.
# masterport = 8140
# Where FileBucket files are stored.
# The default value is '$vardir/bucket'.
bucketdir = /var/lib/puppet/bucket
# The directory in which YAML data is stored, usually in a subdirectory.
# The default value is '$vardir/yaml'.
yamldir = /var/lib/puppet/yaml
# The user puppetmasterd should run as.
# The default value is 'puppet'.
# user = puppet
# Where puppetmasterd logs. This is generally not used,
# since syslog is the default log destination.
# The default value is '$logdir/puppetmaster.log'.
masterlog = /var/log/puppet/puppetmaster.log
# Just check the syntax of the manifests.
# parseonly = false
# Whether to store each client's configuration. This
# requires ActiveRecord from Ruby on Rails.
# storeconfigs = false
# Wether the master should function as a certificate authority.
# The default value is 'true'.
# ca = true
# The header containing an authenticated
# client's SSL DN. Only used with Mongrel. This header must be set by the proxy
# to the authenticated client's SSL DN (e.g., ``/CN=puppet.reductivelabs.com``).
# See http://reductivelabs.com/puppet/trac/wiki/UsingMongrel for more information.
# The default value is 'HTTP_X_CLIENT_DN'.
# ssl_client_header = HTTP_X_CLIENT_DN
# Code to parse directly. This is essentially only used
# by ``puppet``, and should only be set if you're writing your own Puppet
# executable
# The default value is ''.
# code =
# Where the puppetmasterd web server logs.
# The default value is '$logdir/masterhttp.log'.
masterhttplog = /var/log/puppet/masterhttp.log
# The entry-point manifest for puppetmasterd.
# The default value is '$manifestdir/site.pp'.
manifest = /etc/puppet/manifests/site.pp
# The group puppetmasterd should run as.
# The default value is 'puppet'.
# group = puppet
# How the puppetmaster determines the client's identity
# and sets the 'hostname', 'fqdn' and 'domain' facts for use in the manifest,
# in particular for determining which 'node' statement applies to the client.
# Possible values are 'cert' (use the subject's CN in the client's
# certificate) and 'facter' (use the hostname that the client
# reported in its facts)
# The default value is 'cert'.
# node_name = cert
# The header containing the status
# message of the client verification. Only used with Mongrel. This header must be set by the proxy
# to 'SUCCESS' if the client successfully authenticated, and anything else otherwise.
# See http://reductivelabs.com/puppet/trac/wiki/UsingMongrel for more information.
# The default value is 'HTTP_X_CLIENT_VERIFY'.
# ssl_client_verify_header = HTTP_X_CLIENT_VERIFY
# The search path for modules as a colon-separated list of
# directories.
# The default value is '$confdir/modules:/usr/share/puppet/modules'.
modulepath = /etc/puppet/modules:/usr/share/puppet/modules
# Where puppetmasterd looks for its manifests.
# The default value is '$confdir/manifests'.
manifestdir = /etc/puppet/manifests
# The database password for Client caching. Only
# used when networked databases are used.
# The default value is 'puppet'.
# dbpassword = puppet
# The log level for Rails connections. The value must be
# a valid log level within Rails. Production environments normally use ``info``
# and other environments normally use ``debug``.
# The default value is 'info'.
# rails_loglevel = info
# The type of database to use.
# The default value is 'sqlite3'.
# dbadapter = sqlite3
# The database server for Client caching. Only
# used when networked databases are used.
# The default value is 'localhost'.
# dbserver = localhost
# The database socket location. Only used when networked
# databases are used. Will be ignored if the value is an empty string.
# The default value is ''.
# dbsocket =
# Whether to automatically migrate the database.
# dbmigrate = false
# The database user for Client caching. Only
# used when networked databases are used.
# The default value is 'puppet'.
# dbuser = puppet
# Where Rails-specific logs are sent
# The default value is '$logdir/rails.log'.
railslog = /var/log/puppet/rails.log
# The database cache for client configurations. Used for
# querying within the language.
# The default value is '$statedir/clientconfigs.sqlite3'.
dblocation = /var/lib/puppet/state/clientconfigs.sqlite3
# The name of the database to use.
# The default value is 'puppet'.
# dbname = puppet
# Where FileBucket files are stored locally.
# The default value is '$vardir/clientbucket'.
clientbucketdir = /var/lib/puppet/clientbucket
# Where the CA stores signed certificates.
# The default value is '$cadir/signed'.
signeddir = /var/lib/puppet/ssl/ca/signed
# Whether to enable autosign. Valid values are true (which
# autosigns any key request, and is a very bad idea), false (which
# never autosigns any key request), and the path to a file, which
# uses that configuration file to determine which keys to sign.
# The default value is '$confdir/autosign.conf'.
autosign = /etc/puppet/autosign.conf
# The type of hash used in certificates.
# The default value is 'md5'.
# ca_md = md5
# A Complete listing of all certificates
# The default value is '$cadir/inventory.txt'.
cert_inventory = /var/lib/puppet/ssl/ca/inventory.txt
# The certificate revocation list (CRL) for the CA. Set this to 'false' if you do not want to use a CRL.
# The default value is '$cadir/ca_crl.pem'.
cacrl = /var/lib/puppet/ssl/ca/ca_crl.pem
# The CA certificate.
# The default value is '$cadir/ca_crt.pem'.
cacert = /var/lib/puppet/ssl/ca/ca_crt.pem
# Where the CA stores private certificate information.
# The default value is '$cadir/private'.
caprivatedir = /var/lib/puppet/ssl/ca/private
# Where the CA stores the password for the private key
# The default value is '$caprivatedir/ca.pass'.
capass = /var/lib/puppet/ssl/ca/private/ca.pass
# How long a certificate should be valid.
# This parameter is deprecated, use ca_ttl instead
# The default value is ''.
# ca_days =
# The bit length of the certificates.
# The default value is '2048'.
# req_bits = 2048
# The CA private key.
# The default value is '$cadir/ca_key.pem'.
cakey = /var/lib/puppet/ssl/ca/ca_key.pem
# Where the CA stores certificate requests
# The default value is '$cadir/requests'.
csrdir = /var/lib/puppet/ssl/ca/requests
# Where the serial number for certificates is stored.
# The default value is '$cadir/serial'.
serial = /var/lib/puppet/ssl/ca/serial
# The default TTL for new certificates; valid values
# must be an integer, optionally followed by one of the units
# 'y' (years of 365 days), 'd' (days), 'h' (hours), or
# 's' (seconds). The unit defaults to seconds. If this parameter
# is set, ca_days is ignored. Examples are '3600' (one hour)
# and '1825d', which is the same as '5y' (5 years)
# The default value is '5y'.
# ca_ttl = 5y
# The bit length of keys.
# The default value is '1024'.
# keylength = 1024
# The root directory for the certificate authority.
# The default value is '$ssldir/ca'.
cadir = /var/lib/puppet/ssl/ca
# The CA public key.
# The default value is '$cadir/ca_pub.pem'.
capub = /var/lib/puppet/ssl/ca/ca_pub.pem
# The DNS names on the Server certificate as a colon-separated list.
# If it's anything other than an empty string, it will be used as an alias in the created
# certificate. By default, only the server gets an alias set up, and only for 'puppet'.
# The default value is ''.
# certdnsnames =
# The private key directory.
# The default value is '$ssldir/private_keys'.
privatekeydir = /var/lib/puppet/ssl/private_keys
# Where individual hosts store and look for their certificates.
# The default value is '$ssldir/csr_$certname.pem'.
hostcsr = /var/lib/puppet/ssl/csr_blade01-sles-tsm.punchtelematix.net.pem
# Where individual hosts store and look for their public key.
# The default value is '$publickeydir/$certname.pem'.
hostpubkey = /var/lib/puppet/ssl/public_keys/blade01-sles-tsm.punchtelematix.net.pem
# The certificate directory.
# The default value is '$ssldir/certs'.
certdir = /var/lib/puppet/ssl/certs
# Where the client stores private certificate information.
# The default value is '$ssldir/private'.
privatedir = /var/lib/puppet/ssl/private
# Where individual hosts store and look for their certificates.
# The default value is '$certdir/$certname.pem'.
hostcert = /var/lib/puppet/ssl/certs/blade01-sles-tsm.punchtelematix.net.pem
# Where each client stores the CA certificate.
# The default value is '$certdir/ca.pem'.
localcacert = /var/lib/puppet/ssl/certs/ca.pem
# The name to use when handling certificates. Defaults
# to the fully qualified domain name.
# The default value is 'blade01-sles-tsm.punchtelematix.net'.
# certname = blade01-sles-tsm.punchtelematix.net
# The public key directory.
# The default value is '$ssldir/public_keys'.
publickeydir = /var/lib/puppet/ssl/public_keys
# Where puppetd stores the password for its private key.
# Generally unused.
# The default value is '$privatedir/password'.
passfile = /var/lib/puppet/ssl/private/password
# Where individual hosts store and look for their private key.
# The default value is '$privatekeydir/$certname.pem'.
hostprivkey = /var/lib/puppet/ssl/private_keys/blade01-sles-tsm.punchtelematix.net.pem
# Where to store dot-outputted graphs.
# The default value is '$statedir/graphs'.
graphdir = /var/lib/puppet/state/graphs
# Whether to create dot graph files for the different
# configuration graphs. These dot files can be interpreted by tools
# like OmniGraffle or dot (which is part of ImageMagick).
# graph = false
# A lock file to temporarily stop puppetd from doing anything.
# The default value is '$statedir/puppetdlock'.
puppetdlockfile = /var/lib/puppet/state/puppetdlock
# Where puppetd and puppetmasterd store state associated
# with the running configuration. In the case of puppetmasterd,
# this file reflects the state discovered through interacting
# with clients.
# The default value is '$statedir/state.yaml'.
statefile = /var/lib/puppet/state/state.yaml
# Whether facts should be made all lowercase when sent to the server.
# downcasefacts = false
# Where the puppetd web server logs.
# The default value is '$logdir/http.log'.
httplog = /var/log/puppet/http.log
# How often puppetd applies the client configuration; in seconds.
# The default value is '1800'.
# runinterval = 1800
# Whether to sleep for a pseudo-random (but consistent) amount of time before
# a run.
# splay = false
# The type of server to use. Currently supported
# options are webrick and mongrel. If you use mongrel, you will need
# a proxy in front of the process or processes, since Mongrel cannot
# speak SSL.
# The default value is 'webrick'.
# servertype = webrick
# Boolean; wheter or not puppetd should validate the server
# SSL certificate against the request hostname.
# The default value is 'true'.
# http_enable_post_connection_check = true
# The port to use for the certificate authority.
# The default value is '$masterport'.
ca_port = 8140
# Whether to use the cached configuration when the remote
# configuration will not compile. This option is useful for testing
# new configurations, where you want to fix the broken configuration
# rather than reverting to a known-good one.
# The default value is 'true'.
# usecacheonfailure = true
# The file in which puppetd stores a list of the classes
# associated with the retrieved configuration. Can be loaded in
# the separate ``puppet`` executable using the ``--loadclasses``
# option.
# The default value is '$statedir/classes.txt'.
classfile = /var/lib/puppet/classes.txt
# Whether puppetd should listen for
# connections. If this is true, then by default only the
# ``runner`` server is started, which allows remote authorized
# and authenticated nodes to connect and trigger ``puppetd``
# runs.
# listen = false
# Facts that are dynamic; these facts will be ignored when deciding whether
# changed facts should result in a recompile. Multiple facts should be
# comma-separated.
# The default value is 'memorysize,memoryfree,swapsize,swapfree'.
# dynamicfacts = memorysize,memoryfree,swapsize,swapfree
# The pid file
# The default value is ''.
# pidfile =
# The HTTP proxy host to use for outgoing connections. Note: You
# may need to use a FQDN for the server hostname when using a proxy.
# The default value is 'none'.
# http_proxy_host = none
# How long the client should wait for the configuration to be retrieved
# before considering it a failure. This can help reduce flapping if too
# many clients contact the server at one time.
# The default value is '120'.
# configtimeout = 120
# Boolean; whether puppetd should ignore schedules. This is useful
# for initial puppetd runs.
# ignoreschedules = false
# Which port puppetd listens on.
# The default value is '8139'.
# puppetport = 8139
# Whether to send reports after every transaction.
# report = false
# The configuration file for puppetd.
# The default value is '$confdir/puppet.conf'.
config = /etc/puppet/puppet.conf
# Where puppetd caches the local configuration. An
# extension indicating the cache format is added automatically.
# The default value is '$statedir/localconfig'.
localconfig = /var/lib/puppet/localconfig
# Whether puppetd should be run in noop mode.
# noop = false
# Ignore cache and always recompile the configuration. This is
# useful for testing new configurations, where the local cache may in
# fact be stale even if the timestamps are up to date - if the facts
# change or if the server changes.
# ignorecache = false
# The log file for puppetd. This is generally not used.
# The default value is '$logdir/puppetd.log'.
puppetdlog = /var/log/puppet/puppetd.log
# The server to which server puppetd should connect
# The default value is 'puppet'.
# server = puppet
# The maximum time to delay before runs. Defaults to being the same as the
# run interval.
# The default value is '$runinterval'.
splaylimit = 1800
# The address to bind to. Mongrel servers
# default to 127.0.0.1 and WEBrick defaults to 0.0.0.0.
# The default value is ''.
# bindaddress =
# The HTTP proxy port to use for outgoing connections
# The default value is '3128'.
# http_proxy_port = 3128
# The server to which to send transaction reports.
# The default value is '$server'.
reportserver = puppet
# The server to use for certificate
# authority requests. It's a separate server because it cannot
# and does not need to horizontally scale.
# The default value is '$server'.
ca_server = puppet
# Where Puppet looks for template files.
# The default value is '$vardir/templates'.
templatedir = /var/lib/puppet/templates
# Whether to validate types during parsing.
# The default value is 'true'.
# typecheck = true
# Whether to validate parameters during parsing.
# The default value is 'true'.
# paramcheck = true
# Whether to use lexical scoping (vs. dynamic).
# lexical = false
# The mapping between reporting tags and email addresses.
# The default value is '$confdir/tagmail.conf'.
tagmap = /etc/puppet/tagmail.conf
# The server through which to send email reports.
# The default value is 'none'.
# smtpserver = none
# Where to find the sendmail binary with which to send email.
# The default value is '/usr/sbin/sendmail'.
# sendmail = /usr/sbin/sendmail
# The 'from' email address for the reports.
# The default value is 'report@blade01-sles-tsm.punchtelematix.net'.
# reportfrom = report@blade01-sles-tsm.punchtelematix.net
# Whether RRD information should be graphed.
# rrdgraph = false
# How often RRD should expect data.
# This should match how often the hosts report back to the server.
# The default value is '$runinterval'.
rrdinterval = 1800
# The directory where RRD database files are stored.
# Directories for each reporting host will be created under
# this directory.
# The default value is '$vardir/rrd'.
rrddir = /var/lib/puppet/rrd
# The list of reports to generate. All reports are looked for
# in puppet/reports/.rb, and multiple report names should be
# comma-separated (whitespace is okay).
# The default value is 'store'.
# reports = store
# The directory in which to store reports
# received from the client. Each client gets a separate
# subdirectory.
# The default value is '$vardir/reports'.
reportdir = /var/lib/puppet/reports
# Whether each resource should log when it is
# being evaluated. This allows you to interactively see exactly
# what is being done.
# evaltrace = false
# Whether to print a transaction summary.
# summarize = false
# Tags to use to find resources. If this is set, then
# only resources tagged with the specified tags will be applied.
# Values must be comma-separated.
# The default value is ''.
# tags =
# Where the fileserver configuration is stored.
# The default value is '$confdir/fileserver.conf'.
fileserverconfig = /etc/puppet/fileserver.conf
|
Pastie
