#1283743 - Pastie

Embed
Download
Raw
A A A
Ruby on Rails November 09, 2010
1:27AM EDT Report abuse
Copyright (c) 2003-2010 The DragonFly Project.
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
DragonFly v2.7.3.1468.gc4ce4-DEVELOPMENT #2: Mon Nov  8 14:12:03 IST 2010
    root@dfly-vmsrv.hifxnx.local:/usr/obj/usr/src/sys/GENERIC
TSC clock: 2659381950 Hz, i8254 clock: 1193216 Hz
CPU: Intel(R) Pentium(R) D  CPU 2.66GHz (2659.32-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0xf47  Stepping = 7
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x651d<SSE3,DTES64,MON,DS_CPL,TM2,CNXT-ID,CX16,xTPR>
  AMD Features=0x20000000<LM>
  AMD Features2=0x1<LAHF>
  Cores per package: 2
real memory  = 3077897216 (2935 MB)
avail memory = 2967306240 (2829 MB)
module_register: module pci/ahci already exists!
Module pci/ahci failed to register: 17
FQ scheduler policy version 1.0 loaded
No policy for md0 specified, or policy not found
disk scheduler: set policy of md0 to noop
md0: Malloc disk
kbd0 at kbdmux0
ACPI: RSDP 0xf8bb0 00014 (v0 ACPIAM)
ACPI: RSDT 0xb77b0000 00034 (v1 A M I  OEMRSDT  06000612 MSFT 00000097)
ACPI: FACP 0xb77b0200 00084 (v2 A M I  OEMFACP  06000612 MSFT 00000097)
ACPI: DSDT 0xb77b0440 0455F (v1  945GZ 945GZ037 00000037 INTL 02002026)
ACPI: FACS 0xb77c0000 00040
ACPI: APIC 0xb77b0390 0006C (v1 A M I  OEMAPIC  06000612 MSFT 00000097)
ACPI: MCFG 0xb77b0400 0003C (v1 A M I  OEMMCFG  06000612 MSFT 00000097)
ACPI: OEMB 0xb77c0040 00046 (v1 A M I  AMI_OEM  06000612 MSFT 00000097)
npx0: <math processor> on motherboard
npx0: INT 16 interface
Using XMM optimized bcopy/copyin/copyout
cryptosoft0: <software crypto> on motherboard
acpi0: <A M I OEMRSDT> on motherboard
objcache_reclaimlist
objcache_reclaimlist
objcache_reclaimlist
objcache_reclaimlist
acpi0: Power Button (fixed)
Warning: ACPI is disabling APM's device.  You can't run both
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
acpi_button0: <Power Button> on acpi0
fdc0: <NEC 72065B or clone> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
ppc0: <ECP parallel printer port> port 0x778-0x77f,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
cpu0: <ACPI CPU> on acpi0
cpu_cst0: <ACPI CPU C-State> on cpu0
pcib0: <Host to PCI bridge> pcibus 0 on motherboard
pir0: <PCI Interrupt Routing Table: 11 Entries> on motherboard
pci0: <PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0xec00-0xec07 mem 0xff240000-0xff27ffff,0xd0000000-0xdfffffff,0xff280000-0xff2fffff irq 10 at device 2.0 on pci0
agp0: <Intel 82945G (945G GMCH) SVGA controller> on vgapci0
agp0: detected 7932k stolen memory
agp0: aperture size is 256M
pci0: <multimedia, HDA> (vendor 0x8086, dev 0x27d8) at device 27.0 irq 10
uhci0: <Intel 82801G (ICH7) USB controller> port 0xe000-0xe01f irq 5 at device 29.0 on pci0
usb0: <Intel 82801G (ICH7) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801G (ICH7) USB controller> port 0xdc00-0xdc1f irq 11 at device 29.1 on pci0
usb1: <Intel 82801G (ICH7) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801G (ICH7) USB controller> port 0xd880-0xd89f irq 15 at device 29.2 on pci0
usb2: <Intel 82801G (ICH7) USB controller> on uhci2
usb2: USB revision 1.0
uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
uhub2: 2 ports with 2 removable, self powered
uhci3: <Intel 82801G (ICH7) USB controller> port 0xd800-0xd81f irq 10 at device 29.3 on pci0
usb3: <Intel 82801G (ICH7) USB controller> on uhci3
usb3: USB revision 1.0
uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3
uhub3: 2 ports with 2 removable, self powered
ehci0: <Intel 82801GB/R USB 2.0 controller> mem 0xff23fc00-0xff23ffff irq 5 at device 29.7 on pci0
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <Intel 82801GB/R USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb4
uhub4: 8 ports with 8 removable, self powered
pcib1: <PCIBIOS PCI-PCI bridge> at device 30.0 on pci0
pci1: <PCI bus> on pcib1
rl0: <RealTek 8139 10/100BaseTX> port 0xc800-0xc8ff mem 0xff0ffc00-0xff0ffcff irq 3 at device 7.0 on pci1
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: MAC address: 00:13:8f:ad:54:f5
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH7 UDMA100 controller> port 0xffa0-0xffaf,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
No policy for ad0 specified, or policy not found
disk scheduler: set policy of ad0 to noop
ad0: 76319MB <WDC WD800BB-00JHC0 05.01C05> at ata0-master UDMA100
ata1: <ATA channel 1> on atapci0
atapci1: <Intel ICH7 SATA300 controller> port 0xe080-0xe08f,0xe400-0xe403,0xe480-0xe487,0xe800-0xe803,0xe880-0xe887 irq 11 at device 31.2 on pci0
atapci1: failed to enable memory mapping!
ata2: <ATA channel 0> on atapci1
No policy for ad4 specified, or policy not found
disk scheduler: set policy of ad4 to noop
ad4: 305245MB <Seagate ST3320418AS CC38> at ata2-master SATA150
No policy for ad5 specified, or policy not found
disk scheduler: set policy of ad5 to noop
ukbd0: <Chicony USB Keyboard, class 0/0, rev 2.00/1.00, addr 2> on uhub0
kbd1 at ukbd0
ad5: 114473MB <Seagate ST3120827AS 3.42> at ata2-slave SATA150
ata3: <ATA channel 1> on atapci1
uhid0: <Chicony USB Keyboard, class 0/0, rev 2.00/1.00, addr 2> on uhub0
No policy for acd0 specified, or policy not found
disk scheduler: set policy of acd0 to noop
acd0: DVDR <Optiarc DVD+/-RW AD-5170S/101B> at ata3-master SATA150
pci0: <serial bus, SMBus> (vendor 0x8086, dev 0x27da) at device 31.3 irq 11
pmtimer0 on isa0
fdc1: cannot reserve I/O port range
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
lm0: <Winbond W83627EHF Hardware Monitor> at port 0x290-0x297 on isa0
wbsio0: <Winbond LPC Super I/O W83627EHF rev 0x63> at port 0x2e-0x2f on isa0
wbsio0: hardware monitor iobase is 0x290
wbsio0: lm0 is already attached at 0x290
sio2: can't drain, serial port might not exist, disabling
ppc1: cannot reserve I/O port range
CAM: Configuring 4 busses
CAM: finished configuring all busses
No policy for cd0 specified, or policy not found
disk scheduler: set policy of cd0 to noop
cd0 at ata3 bus 0 target 0 lun 0
cd0: <Optiarc DVD+-RW AD-5170S 101B> Removable CD-ROM SCSI-0 device 
cd0: 3.300MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
Mounting root from hammer:serno/9VMBWDM1.s1d
tryroot serno/9VMBWDM1.s1d
uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
uhub2: 2 ports with 2 removable, self powered
uhci3: <Intel 82801G (ICH7) USB controller> port 0xd800-0xd81f irq 10 at device 29.3 on pci0
usb3: <Intel 82801G (ICH7) USB controller> on uhci3
usb3: USB revision 1.0
uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3
uhub3: 2 ports with 2 removable, self powered
ehci0: <Intel 82801GB/R USB 2.0 controller> mem 0xff23fc00-0xff23ffff irq 5 at device 29.7 on pci0
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <Intel 82801GB/R USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb4
uhub4: 8 ports with 8 removable, self powered
pcib1: <PCIBIOS PCI-PCI bridge> at device 30.0 on pci0
pci1: <PCI bus> on pcib1
rl0: <RealTek 8139 10/100BaseTX> port 0xc800-0xc8ff mem 0xff0ffc00-0xff0ffcff irq 3 at device 7.0 on pci1
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: MAC address: 00:13:8f:ad:54:f5
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH7 UDMA100 controller> port 0xffa0-0xffaf,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
No policy for ad0 specified, or policy not found
disk scheduler: set policy of ad0 to noop
ad0: 76319MB <WDC WD800BB-00JHC0 05.01C05> at ata0-master UDMA100
ata1: <ATA channel 1> on atapci0
atapci1: <Intel ICH7 SATA300 controller> port 0xe080-0xe08f,0xe400-0xe403,0xe480-0xe487,0xe800-0xe803,0xe880-0xe887 irq 11 at device 31.2 on pci0
atapci1: failed to enable memory mapping!
ata2: <ATA channel 0> on atapci1
No policy for ad4 specified, or policy not found
disk scheduler: set policy of ad4 to noop
ad4: 305245MB <Seagate ST3320418AS CC38> at ata2-master SATA150
No policy for ad5 specified, or policy not found
disk scheduler: set policy of ad5 to noop
ukbd0: <Chicony USB Keyboard, class 0/0, rev 2.00/1.00, addr 2> on uhub0
kbd1 at ukbd0
ad5: 114473MB <Seagate ST3120827AS 3.42> at ata2-slave SATA150
ata3: <ATA channel 1> on atapci1
uhid0: <Chicony USB Keyboard, class 0/0, rev 2.00/1.00, addr 2> on uhub0
No policy for acd0 specified, or policy not found
disk scheduler: set policy of acd0 to noop
acd0: DVDR <Optiarc DVD+/-RW AD-5170S/101B> at ata3-master SATA150
pci0: <serial bus, SMBus> (vendor 0x8086, dev 0x27da) at device 31.3 irq 11
pmtimer0 on isa0
fdc1: cannot reserve I/O port range
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
lm0: <Winbond W83627EHF Hardware Monitor> at port 0x290-0x297 on isa0
wbsio0: <Winbond LPC Super I/O W83627EHF rev 0x63> at port 0x2e-0x2f on isa0
wbsio0: hardware monitor iobase is 0x290
wbsio0: lm0 is already attached at 0x290
sio2: can't drain, serial port might not exist, disabling
ppc1: cannot reserve I/O port range
CAM: Configuring 4 busses
CAM: finished configuring all busses
No policy for cd0 specified, or policy not found
disk scheduler: set policy of cd0 to noop
cd0 at ata3 bus 0 target 0 lun 0
cd0: <Optiarc DVD+-RW AD-5170S 101B> Removable CD-ROM SCSI-0 device 
cd0: 3.300MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
Mounting root from hammer:serno/9VMBWDM1.s1d
tryroot serno/9VMBWDM1.s1d
HAMMER(ROOT) recovery check seqno=019fde3c
HAMMER(ROOT) recovery range 3000000005a03a48-3000000005a03a48
HAMMER(ROOT) recovery nexto 3000000005a03a48 endseqno=019fde3d
HAMMER(ROOT) mounted clean, no recovery needed
Mounting devfs
11477 characters / 225 lines